First F-35B Assembled Internationally Rolled Out of Cameri FACO Production Facility

It’s the first F-35B assembled outside of the U.S.

On May. 5, the first F-35B, the Short Take-Off Vertical Landing variant of the the F-35 Lightning II, destined to the Italian Navy, rolled out of the Final Assembly and Check Out (FACO) facility at Cameri, in northwestern Italy.

The aircraft, designated BL-1, is the first F-35B assembled internationally. It is expected to perform its first flight in late August and will be delivered to the Italian MoD in November 2017. After a series of “confidence flights” from Cameri, an Italian pilot will fly the first F-35B jet to Naval Air Station Patuxent River, Maryland, early in 2018 to conduct required Electromagnetic Environmental Effects certification. The next Italian F-35B aircraft is scheduled for delivery in November 2018.

According to a Lockheed Martin release, besides the first B example, two Italian F-35A aircraft will be delivered from Cameri this year, the first by July and the second in the fourth quarter. To date, seven F-35As have been delivered from the Cameri FACO; four of those jets are now based at Luke Air Force Base, Arizona, for international pilot training and three are at Amendola Air Base, near Foggia on the Adriatic coast. With these aircraft based in Italy and flown by the 13° Gruppo, the Aeronautica Militare (Italian Air Force) has already flown more than 100 flight hours.

In spite of a very low profile on the subject, Italy has achieved some important results with the F-35.

On Dec. 3, 2015, the ItAF welcomed the first F-35 at the Cameri FACO. That aircraft was also the first assembled and delivered outside the U.S.

On Feb. 5, 2016 the first Italian Air Force F-35, successfully completed the type’s very first transatlantic crossing landing at Naval Air Station Patuxent River, Maryland. On Dec. 12, 2016, the Italian Air Force became the first service to take delivery of the first operational F-35s outside the United States.

“Italy is not only a valued F-35 program partner that has achieved many F-35 program ‘firsts’, but is also a critical NATO air component force, providing advanced airpower for the alliance for the coming decades,” Doug Wilhelm, Lockheed Martin F-35 Program Management vice president, said at the event for the roll out of the first F-35B. “Italian industry has participated in the design of the F-35 and Italian industry made components fly on every production F-35 built to date.”

The Italian FACO, a 101-acre facility including 22 buildings and more than one million square feet of covered work space, housing 11 assembly stations, and five maintenance, repair, overhaul, and upgrade bays, is owned by the Italian Ministry of Defense and is operated by Leonardo in conjunction with Lockheed Martin Aeronautics. According to Lockheed, 800 skilled personnel are engaged in full assembly of the Conventional Take-off/Landing F-35A and F-35B aircraft variants and is also producing 835 F-35A full wing sets to support all customers in the program.

The Cameri FACO has the only F-35B production capability outside the United States. It will assemble the 60 Italian F-35As and 30 F-35Bs (for a total of 90 aircraft to be procured by the Italian Air Force and Navy), will build 29 F-35A for the Royal Netherlands Air Force and was selected in December 2014 as the European F-35 airframe Maintenance, Repair, Overhaul and Upgrade center for the entire European region.

In spite of some initial internal criticism and threatened cuts, F-35s will replace the Italian Air Force ageing Tornado and AMX attack planes and the Italian Navy AV-8B aircraft.

Image credit: LM

 

About David Cenciotti
David Cenciotti is a journalist based in Rome, Italy. He is the Founder and Editor of “The Aviationist”, one of the world’s most famous and read military aviation blogs. Since 1996, he has written for major worldwide magazines, including Air Forces Monthly, Combat Aircraft, and many others, covering aviation, defense, war, industry, intelligence, crime and cyberwar. He has reported from the U.S., Europe, Australia and Syria, and flown several combat planes with different air forces. He is a former 2nd Lt. of the Italian Air Force, a private pilot and a graduate in Computer Engineering. He has written five books and contributed to many more ones.